Problems HWIC-3G-GSM for Cisco 1941 router

I am replacing an old 1841 that has a HWIC-3G-GSM coax card in it

I need to know what is the part number for the equivalent HWIC-3G card that goes into the new Cisco 1941 router.

Does anyone know what that part number is?  (and could you please provide both a link and a picture so that I can be sure it is the coax version?)

The 1841 also has a T-1 WIC so if you could also include the part number for an equivalent T-1 WIC for the Cisco 1941 router, I would appreciate it.

The solution:

The part numbers vary based upon the carrier.

EHWIC-3G-HSPA +7-A    :  GSM card for AT&T

3.7G HSPA+ Release 7 EHWIC w/ SMS/GPS (MC8705) (AT&T)

EHWIC-3G-EVDO-S : GSM card for Sprint

3G EHWIC Sprint EV-DO Rev A/0/1xRTT 800/1900MHz with SMS/GPS

EHWIC-3G-EVDO-V: GSM card for Verizon

3G EHWIC Verizon EV-DO Rev A/0/1xRTT 800/1900MHz w/ SMS/GPS

Customers interested in purchasing CISCO1941W-T/K9, best price on 3anetwork.com:

US$1,215.00, 42% off. As the List price: US$2,095.00.

Cisco 1941 builds on the best-in-class offering of the existing Cisco 1841 Integrated Services Routers by offering 2 models - Cisco 1941 and Cisco 1941W. In addition to the support of a wide range of wireless and wired connectivity options supported on Cisco 1941 Series, Cisco 1941W offers integration of IEEE 802.11n access point which is backwards compatible with IEEE 802.11a/b/g access points.

3Anetwork.com wholesales Cisco 1900 Series Integrated Services Router CISCO1941W-T/K9, CISCO1941W-T, CISCO1941W, original new Cisco CISCO1941W-T/K9 at competitive price. In most cases, we can deliver CISCO1941W-T/K9 in 2 business days. Simply add Cisco CISCO1941W-T/K9 to your shopping cart for the best price Cisco Integrated Services Router CISCO1941W-T/K9. Good discount of Cisco 1900 Series Router, best Cisco 1900 Router CISCO1941W-T/K9 price, save your money.

Contack information:

Telephone: +852-3069-7733(Hong Kong)

Fax: +852-3069-7731

Email:   info@3Anetwork.com(Sales Inquiries)

Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong

Website: http://www.3anetwork.com

Cisco 1941 Router Can't Connect to WAN

Cisco 1941 Router Can't Connect to WAN

1 I am converting our offices over to Cisco 1941 routers.  The total background of it was covered in this EE question: Configuring 1941 Router

Since then, I have confirmed that everything internally, works fine.  I can communicate with all the internal networks as was planned.  What is not working, is getting out to the internet.  I have taken a second 1941 and configured it with a striped down config, and can connect out to the internet fine.  I have also moved the WAN connection to int g0/0 from int g0/0/0, but that made no difference.  From the CLI, I can ping the gateway, but nothing else outside.

What am I missing or what do I have configured incorrectly?

I've attached the current running config.  Usernames/Passwords, and certain ip addresses have been replaced with xxxxxxxx or x.x.x.x.

Solution:

On first look at your ACL's you have subnet masks and not wildcard masks:

access-list 101 permit tcp any 0.0.0.0 255.255.255.0 established

access-list 102 permit tcp any 0.0.0.0 255.255.255.0 established

access-list 105 permit tcp any 0.0.0.0 255.255.255.0 established

etc.. etc...

if you want this to be ANY ANY you should have access-list XYZ permit tcp any 0.0.0.0 255.255.255.255 established, just checking through rest of config.

2 Ping 8.8.8.8 timed out, on both the router and a connected pc.

I just did some other ping tests.  As said before, I can ping the WAN gateway.  Can't ping a external domain name (doesn't get translated), can't ping an external domain ip, and can't ping the ISP DNS servers (which I confirmed correct).

guptasan26: if I remove those routes, will the 1941 automatically route the internal networks?

Solution:

No sure how current the config is that yo uposted but you have turned off routing with the

no ip routing.

Re-enable ip routing by entering ip routing from config mode and then you should be able to route correctly.